US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Command Reference Manual page 91

Result Code
CONNECT 46666 EC*
CONNECT 49333 EC*
CONNECT 50666 EC*
CONNECT 53333 EC*
CONNECT 54666 EC*
Note:*EC only appears when the extended result codes configuration option is enabled. EC is replaced by
one of the following symbols, depending on the error control method used:
V42bis—V.42 error control and V.42 bis data compression.
V42—V.42 error control only.
MNP 5—MNP class 4 error control and MNP class 5 data compression.
MNP 4—MNP class 4 error control only.
NoEC—no error control protocol.
Numeric
Code
110 Connection at 46666 bits/s.
111 Connection at 49333 bits/s.
112 Connection at 50666 bits/s.
113 Connection at 53333 bits/s.
114 Connection at 54666 bits/s.
56K Softmodem
Command Reference
Description
- 83