Table of Contents
Advertisement
S94—DTMF Transmit Level for High DTMF Group
Default: 6 (–6 dBm transmit level).
Base Unit: –1 dBm transmit level.
This register has a dual purpose:
1
When S94 is zero, then S93 controls the overall DTMF transmit level, with
the twist between DTMF groups fixed at 2 dB.
2
When S94 is set to nonzero value, it controls the transmit level for high
DTMF group only.
Range: 0, 5 to 25 dBm (corresponding to –5 to –25 dBm transmit level).
Default: 0 (S93 controls overall DTMF transmit gain).
Base Unit: –1 dBm.
56K Softmodem
Command Reference
- 93
Advertisement
Table of Contents
Related Manuals for US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1
Related Products for US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1
- US ROBOTICS 56K MESSAGE MODEM - QUICK FOR WINDOWS
- US ROBOTICS 56K FAXMODEM USB - FOR WINDOWS REV 1.1
- US ROBOTICS 56K INTERNAL VOICE FAXMODEM - QUICK FOR WINDOWS REV 1.2
- US ROBOTICS 56K PCI FAXMODEM - QUICK REV 1
- US ROBOTICS 56K USB MODEM - QUICK REV 2.0
- US ROBOTICS 56K Series
- US Robotics Courier 56K 3453C
- US Robotics 56K SERIAL CONTROLLER FAXMODEM
Need help?
Do you have a question about the 56 K SOFTMODEM - COMMAND REFERENCE REV 1 and is the answer not in the manual?
Questions and answers