US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Command Reference Manual page 41

Result codes:
0
1
2
3
4
5
6
7
8
9
10
Value
0
1
Value
0
1
OK if <signal> = 0—10 and <sig_en> = 0, 1 and <msg_en> = 0, 1 and
<supp_delay> = 0,1.
ERROR if <signal> does not equal 0—10 or <sig_en> does not equal 0, 1 or
<msg_en> does not equal 0, 1 or <supp_delay> does not equal 0,1.
Table 3-54: Valid <signal> Values
Value
None.
Initiating Mre.
Initiating MRd.
Initiating CRe, low power.
Initiating CRe, high power.
Initiating CRd.
Initiating Esi.
Responding MRd, low power.
Responding MRd, high power.
Responding CRd.
Responding Esr.
Table 3-55: Valid <sig_en> Values
Enables detection of initiation signals (default).
Enables detection or responding signals.
Table 3-56: Valid <msg_en> Values
Disables detection of messages (default).
Enables detection of V.8 bis messages.
Meaning
Meaning
Meaning
56K Softmodem
Command Reference
- 35