Compaq 222863-001 - TaskSmart W2200 Model 10 Administration Manual page 81

3-24 Compaq TaskSmart W2200 Appliance Server Administration Guide
SNMP Setup
Click SNMP Setup in the left submenu and the SNMP Setup screen is
displayed, as shown in Figure 3-11.
Figure 3-11. Network, SNMP Setup screen
To configure the simple network management protocol (SNMP) on the
network:
1. Use the check box to allow or disallow Apache SNMP.
2. Type the following in the corresponding text field:
G
Read-only Community String
G
Read-Write Community String
G
Trap Community String
G
Trap Destination Address
NOTE: You must provide complete SNMP information in the SNMP Setup screen to
enable the SNMP feature. If any of the text fields are left blank, then that SNMP feature is
disabled.