Compaq 222863-001 - TaskSmart W2200 Model 10 Administration Manual page 102

Table A-1
Web Server Configuration Application Error Messages
Error Message
Error: No user node in template file to
clone..
Error: The log file path is invalid.
Error: The mime.types file location is
invalid.
The file path is an invalid path.
The value is not an integer.
The value is not a floating point number.
The value is less than zero.
The Net Mask field is empty.
The Net Mask is invalid.
The Net Mask is not valid because it has
spaces in it.
The Net Mask is not valid because it has
characters in it that are not digits (0-9).
The Net Mask is invalid because it has
values in it that are greater than 255.
The Gateway is invalid because it has
values in it that are greater than 255.
The destination is invalid because it has
values in it that are greater than 255.
User does not exist.
The NTP Server field is blank.
The name server field is blank.
The name server is already in use.
The host name cannot be blank.
The site name has a suffix that is not legal.
The server name has spaces in it.
continued
User Action
None
Enter a valid log file path.
Enter a valid mime.types file location.
Enter a valid file path.
Enter a positive integer (0-9).
Enter a floating point number.
Enter a value that is greater than zero.
Enter a net mask.
Enter a valid net mask.
Enter a net mask without spaces.
Enter a net mask with digits and in the
form of ###.###.###.###.
Enter a net mask that contains values less
than or equal to 255.
Enter a Gateway that contains values less
than or equal to 255.
Enter a destination that contains values
less than or equal to 255.
Create a new user or enter a valid user.
Enter an IP address or host name for a valid
NTP server.
Enter a name server name.
Use a name server not currently listed.
Enter a host name.
Enter a site name with one of the following
suffixes: .com, .net, .org, .edu, .mil, .int, or
any two letter combination.
Enter a server name without spaces.
Troubleshooting A-7
continued