Compaq 222863-001 - TaskSmart W2200 Model 10 Administration Manual page 32

2-14 Compaq TaskSmart W2200 Appliance Server Administration Guide
Step 3: Eth0 Network Information
Step 3 requests Eth0 network information and is shown in Figure 2-3.
Figure 2-3. Rapid Startup Step 3: Eth0 Network Information screen
In the dialog box of Step 3, provide the following information:
1. Select the check box to enable Eth0, or deselect the check box to disable
Eth0.
2. In the Friendly Name text box, type a name for Eth0.
3. For Mode, use the option buttons to select one of the following modes:
a. Static
b. DHCP
c. BOOTP
IMPORTANT: A static IP address is required for at least one of the Ethernet interfaces.
You must log in again to the new IP address to regain access. If the client utility is still
running, restart the search after you finish Rapid Startup to find the appliance at its new
address.