Compaq 222863-001 - TaskSmart W2200 Model 10 Administration Manual page 76

To set server time and date:
1. In the Synch with Time Server list box, select No if you do not want to
synchronize the server time with a Time Server or choose the
synchronization frequency. If you select No, skip step 2.
2. In the Time Server text field, type the IP address or DNS name of the
time server that you want to use.
3. Select the date using the list boxes in the System Date field.
4. Select the time using the list boxes in the System Time field.
5. Select a time zone using the list box in the Time Zone field.
6. Click Update Time/Date.
Network
Click Network in the left menu and the Network submenu is displayed, as
follows:
I
Host Name
I
Eth0 Network Information
I
Eth1 Network Information
I
Domain Name Resolution
I
Routing
I
Service Setup
I
SNMP Setup
I
Network File Systems (NFS)
I
Ping Utility
I
Trace a Route
Host Name
Click Host Name in the left submenu.
Type the server host name in the Host Name text field, and then click Update.
Advanced Administrative Procedures 3-19