Removing And Installing An Rp Or A Line Card - Cisco 12406 Installation And Configuration Manual

Chapter 6 Maintaining the Router

Removing and Installing an RP or a Line Card

OL-11497-03
Line cards can occupy any slot, slot 0 (the top slot) through slot 4, in the RP and
line card cage. (See Figure
configured with the RP in slot 5 (the bottom slot). A redundant RP can be installed
in any slot. The redundant RP requires a line card spacer to comply with EMI
emission standards.
Figure 6-27 Cisco 12006 and Cisco 12406 routers Card Cage Slot Locations
Rack mounting
bracket holes
Additional line card information can be found in the installation and configuration
note for each type of line card. These notes accompany every line card that ships
from the factory as an FRU.
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
Removing and Installing an RP or a Line Card
6-27.) Your Cisco 12006 or Cisco 12406 Router is
Line card
Line card
Line card
Line card
Line card
Route processor
CSC
CSC
Alarm Alarm
Power supply
SFC
SFC
SFC
Power supply
6-47