Removing and Installing the Front Door on Cisco 12006 and Cisco 12406 Enhanced Series Router
Remove the bumpers and pivot blocks from the door as shown in
Step 4
Figure 6-3
1 Bumpers
Reinstall the hardware to the opposite sides of the front door:
Step 5
a.
b.
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
6-6
Removing the Bumpers and Pivot Blocks
1
Mount pivot blocks to the left side and tighten the screws until snug.
Mount the bumpers to the right side and tighten the screws until snug.
Chapter 6
2
2
Pivot blocks
Maintaining the Router
Figure
6-3.
OL-11497-03