Cisco 12406 Installation And Configuration Manual page 284

Removing and Replacing a DC PDU
Step 4
Figure 6-21 Removing the Blower Module
1
HIG H SPE ED
BLO WE R
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
6-40
Remove the blower module
Lift the blower module handle to its raised (carrying) position.
a.
b. Loosen the (4) captive screws on the blower module.
Remove the blower module by grasping it on each side and pulling it straight
c.
back from the chassis.
2
(Figure 6-21):
Chapter 6 Maintaining the Router
OL-11497-03