Cisco 12406 Installation And Configuration Manual page 99

Chapter 2 Preparing for Installation
The dual-hole lug is crimped onto a grounding wire of a wire size and length
determined by your router location and facility environment. The crimping tool
shown in
hardware source.
Figure 2-6
1
2
1
Note The three threaded inserts that make up the grounding receptacle are set in a
triangle so that you can choose any two of the three holes to attach the lug and
grounding cable.
OL-11497-03
Figure 2-6 is a standard crimping tool obtainable from any normal
Crimping the Lug
Place ground wire in the lug
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
Site Requirement Guidelines
2 Crimp the lug
2-19