Cisco 12406 Installation And Configuration Manual page 114

Supplemental Bonding and Grounding Connections
Figure 3-5 Cable Lug
End View
Ø 0.267
0.48
2 holes
0.25
0.08
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
3-10
Figure 3-4 Supplemental Bonding and Grounding Port for NEBS
Compliance
GIG ABIT
ROU TE
PRO CES
SOR
CIS CO 12
00 0
GIGA BIT SERIES
SWI TCH
ROU TER
Use a dual-hole lug to connect to the chassis with two 6.3-mm (M6) screws on the
0.63-inch (16-mm) centers as shown in
ordered from Cisco (Part Number 32-0607-01).
2.24
0.63 0.37
The dual-hole lug is crimped onto a grounding wire of a wire size and length
determined by your router location and facility environment. The crimping tool
shown in Figure 3-6 is a standard crimping tool obtainable from many sources.
Figure 3-4
All measurements in inches
Crimp area
Chapter 3 Installing the Router
and Figure 3-5. The lug can be
OL-11497-03