Cisco 12406 Installation And Configuration Manual page 274

Removing and Replacing an AC PDU
Reinstall the power supplies
Step 13
a.
To prevent damage to the connectors, do not use excessive force when inserting
Caution
the power supply into the chassis.
b.
c.
Figure 6-15
Set the power switch on both power supplies to the On (1) position.
Step 14
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
6-30
Push the power supply into its bay until it mates with its PDU connector.
Close the ejector levers and tighten the captive screws to securely seat the
power supply to the chassis.
Repeat steps a. and b. for the second power supply.
Seating the AC Power Supply
(Figure 6-15):
Chapter 6 Maintaining the Router
OL-11497-03