MICRO-EPSILON interferoMETER IMS5200 Quick Manual page 13

Initial Operation
Presets, Measurement Configuration
Common measurement configurations (presets) for various targets are stored on the controller. This allows you to
quickly start with your individual measurement task. In a preset the basic features like peak or material selection and
calculation functions are already set.
When saving a modified preset, the web interface displays a dialog for entering a setup name. This prevents presets
from being overwritten by accident. Data output only starts when the associated interface is activated.
Preset
Overview possible presets
IMS5200-TH / IMS5200MP-TH
IMS5200 IMS5200MP
• •
• •
• •
The signal quality is set to Balanced at the
factory.
Go to the Home > Measurement config-
uration menu and start the Measurement
configuration.
Select a configuration.
Then, you can apply your own settings (setups).
Preset
•
possible preset
IMS5200 IMS5200MP
•
•
Page 13