Copying; Basic Copying - Xerox WorkCentre 6400V/S User Manual

Copying

Basic Copying

To make copies:
1. Press the Clear All button on the right side of the control panel to clear the settings from the
previous job.
2. Load your original documents. Use the document glass for single copies, or the document feeder
for multiple pages.
Note: The document feeder will only recognize A5, ISO B5, A4, Letter, Legal and Postcard size
paper. Adjust the guides on the document feeder for the paper size you are using.
Document Glass
Lift the document feeder cover and place the
original facedown, towards the back-left
corner of the document glass. The original
must be aligned to the matching paper size
printed on the edge of the glass.
3. On the control panel touch screen, select Copy.
4. Use the keypad on the right side of the control panel to enter the number of copies.
5. The number of copies appears in the upper-right corner of the touch screen screen.
6. If desired, change the copy settings; see
7. Press the green Start button on the right side of the control panel.
• If you placed originals in the document feeder, copying continues until the document feeder is
empty.
• If you placed an original on the document glass and selected an option that puts more than
one image on the paper, a prompt appears on the top of the touch screen when it is time to
place the next original on the glass. Press the Start button to scan the next original.
• To cancel printing of the copies, press the Stop button on the right side of the control panel.
84 WorkCentre 6400 Multifunction Printer
User Guide
6400-065
Document Feeder
Insert originals face up with the top of the page
entering the feeder first. Adjust the paper guides
so they fit against the originals.
Adjusting Copy Options
6400-067
on page 85.