ChargePoint Power Block Design Manual page 6

This document describes how to design a project site for the ChargePoint® Express Plus DC fast charging
solution.
The Express Plus product family is a modular solution for scalable fast charging of electric vehicles. Power
Link 2000 charging stations are powered by Power Block AC/DC converters, and the entire system
communicates with ChargePoint using the mobile network. This connectivity is required for diagnostics
and reporting, as well as communication with the online dashboard that allows the station owner to control
its settings and commands. See
Full specifications and system certifications for Express Plus can be found in the datasheet. Contact your
ChargePoint representative for a copy.
Access ChargePoint documents at chargepoint.com/guides.
Document
Datasheet
Site Design Guide
Concrete Mounting
Template Guide
Surface Conduit Entry Kit
Guide
Installation Guide
Operation and
Maintenance Guide
Service Guide
Declaration of Conformity
IMPORTANT: ChargePoint recommends consulting with an engineer to create site specific
drawings. Ensure that the installation complies with all applicable codes and ordinances.
1
Site Design Guidelines
1
Electrical Design for detailed information.
Content
Full station specifications
Civil, mechanical and electrical
guidelines to scope and construct the
site
Instructions to embed the charging
station template in a concrete pad with
anchor bolts and conduit placement
Instructions in situations where site
cannot run conduits underground
Anchoring, wiring and powering on
Operation and preventative
maintenance
Component replacement procedures
Statement of conformity with directives Purchasers and public
Primary Audiences
Site designer, installer and station
owner
Site designer or engineer of
record
Site construction contractor
Installer
Installer
Station owner, facility manager
and technician
Service technician
1