Image Access BookTEK 5 V3 Setup Instructions page 29

Connecting the power supply
Risk of electric shock due to incorrect connection.
➢ Ensure that the mains socket is earthed in accordance with
local regulations.
Incorrect routing of the connection cables can cause tripping,
broken bones, bruises and crushing.
➢ Lay the connection cables so that no one can trip over
them.
To connect the power supply, proceed as follows:
➢ Make sure the scanner's main power switch is turned off (0 position).
➢ Only use the power supply unit and power supply cable included in the
scope of delivery.
➢ Make sure that the power supply cable is undamaged.
➢ Connect the low voltage plug to the appropriate DC connector on the
back of the scanner.
➢ Connect the power supply's plug to a power outlet with a suitable
voltage. (100 to 240 V AC)
WARNING
CAUTION
Prepare setup
29