Image Access BookTEK 5 V3 Setup Instructions page 28

Prepare setup
➢ Connect one HDMI plug of the HDMI cable to the HDMI connection
socket of the monitor.
➢ Connect the other HDMI plug of the HDMI cable to the HDMI
connection socket on the back of the scanner.
➢ Connect one USB plug of the USB cable to the USB connection socket of
the monitor.
➢ Connect the other USB plug of the USB cable to one of the two USB
connection sockets on the back of the scanner.
To connect the monitor power supply, proceed as follows:
➢ Ensure that the main switch of the monitor is switched off (0 position).
➢ Only use the power supply unit and power supply cable included in the
scope of delivery.
➢ Ensure that the power supply cable is undamaged.
➢ Connect the low-voltage plug to the corresponding DC connection
socket on the monitor.
➢ Connect the mains plug of the power supply unit to a mains socket with
a suitable voltage. (100-240 V AC)
28