Image Access BookTEK 5 V3 Setup Instructions page 10

Device safety
Basic safety instructions
Avoid injury or death from electric shock
➢ Never open the scanner case.
➢ Do not expose the scanner to dripping or splashing water, and do not
place liquid-filled containers on the scanner. Liquid penetration can
damage the scanner.
➢ Do not insert objects into the scanner through any slots or openings.
➢ Connect the scanner only to a properly installed and grounded AC outlet
using the supplied AC adapter.
➢ Do not use the AC adapter if the AC adapter case or cord is damaged. In
this case, replace the AC adapter with an AC adapter of the same type.
➢ Do not use the scanner if it is visibly damaged. In this case, unplug the
power cord from the power outlet. Contact Image Access technical
support, see section Technical Support from page 8.
Avoid burns
➢ Do not cover the existing openings in the scanner housing. They are
used for ventilation. Otherwise, the scanner could overheat.
➢ Do not place the scanner in front of air conditioners that emit intense
heat.
Avoid broken bones, bruises and contusions
Incorrect cable routing can lead to tripping.
➢ Lay the connection cables in such a way that nobody can trip over them.
Depending on the scanner model, it weighs between 29 and 53 kg (64 - 117
lbs.).
➢ Only handle the scanner with the help of a second person.
➢ Only place the scanner on a firm, level and vibration-free surface that
has sufficient load-bearing capacity for the weight of the scanner.
10