Infors HT ECOTRON Manual page 7

08 May 2013
Safety points related to testing the equipment
The main power switch should not be used as a functional ON/OFF.
Never put your hand into an operating unit – risk of injury due to high
rotational forces.
Handle glass vessels, reagent bottles and other glass components with
care to minimise the risk of breakage or other damage resulting is sharp edges
Do not apply excessive pressure when handling any glass components in
case of breakage and consequent sharp edges.
Ensure hair, loose clothing etc cannot come into contact with any rotating
parts.
Emissions and Warning indications
Any loud and/or unusual noise from any part of the equipment should be
taken as a sign of a problem and the equipment closed down and inspected
immediately.
Any smoke or smell of burning should be taken as a sign of a problem and
the equipment closed down and inspected immediately.
In normal operation, some additional noise and heat may be generated, the
extent depending on the phase of operation (see performance data)
Service & Maintenance
Only fully qualified and authorised persons may repair the equipment
Cleaning and routine maintenance information in provided in the main manual.
(Operating-Manual_Ecotron _e) page 7 of 53