Infors HT ECOTRON Manual page 6

08 May 2013
Safety points relating to installation & use
Electrical connections should only be installed and fitted by a qualified
electrician to current electrical safety regulations.
Installation of all services lines should be made only with pressure
resistant tubing retained with suitable tubing clamps.
Authorization for use of an oxygen supply and its operation in accordance
with your own safety guidelines are the responsibility of the customer'
Never use the main ON/OFF switch to end operation!
Always work to GMP and observe other appropriate standards
Observe all safety issues relating to hazardous chemicals, biological
material and equipment under pressure, especially points regarding skin and eye
contact.
The equipment is only to be operated by suitably qualified and trained
personnel, both in terms of equipment use & microbiological expertise.
In normal use, operators should ware appropriate safety clothing, gloves,
safety goggles and a face mask as appropriate to the degree of microbiological
risk.
The nature of the microbiological and chemical risks associated with the
use of individual units cannot be assessed by the manufacturer and its
specification is the responsibility of the user.
The environmental hazards associated with the use of individual units
cannot be assessed by the manufacturer and its specification is the responsibility
of the user.
(Operating-Manual_Ecotron _e) page 6 of 53