Power Button; Keyboard - NEC Versa TXi Series Service Manual

n
Power Button — Press the Power button to power on, power off, and to resume from
Standby mode. For more information about the Power button, see "Power Button," next.
n
NEC VersaGlide™ Touchpad — Works like a standard computer mouse. Move your
fingertip over the VersaGlide Touchpad to control the position of the cursor. Use the left
and right selection buttons below the VersaGlide Touchpad to select menu items. Use the
scroll button to scroll up or down in a document.

Power Button

The Power/Sleep button is a "smart" switch, meaning that it recognizes when the system is in
Standby mode. If in Standby mode, you cannot power off until you press the Power button to
resume operation. (The BIOS parameter "System Switch" must be set to "Sleep.")
Put the unit in Standby mode when you need to be away from the system for a short period of
time and want to return to where you left off. Standby mode shuts down all devices in the
system while retaining data and system status. Go to Start, Shutdown, Standby to put the system
into Standby mode.
Use the Power button in the following ways:
n Press the Power button to power on.
n Press the Power button to resume from Standby mode and proceed with normal operation.
n Press and hold the Power button in place for four or more seconds to power off the system
(power override). Only use this option if you cannot power off the system using Start,
Shutdown.

Keyboard

The Versa TXi notebook keyboard offers the following features, which are described after the
figure.
Keyboard
A – Function Keys
B – Numeric Keys
C – Windows Keys
D – Cursor Control Keys
E – Control Keys
System Overview 1-5