Power Management Setup Power Management Setup - NEC VERSA 6200MX Service Manual

Advanced CMOS Setup
Advanced CMOS settings let you define the following functions.
T
BootUp Sequence — Sets the order that the drives (A:, C:) initialize, or sets the
order to search for the boot disk.
T
Plug and Play Aware O/S — Selects whether or not the system boots to a Plug
and Play operating system.
T
NumLock (at Boot) — Specifies whether NumLock is On or Off at system
startup.
T
Keyboard Auto-Repeat Rate — Defines the speed at which a repeat key repeats.
T
Keyboard Auto-Repeat Delay — Defines how long a key waits before beginning
to repeat.
T
Password Check — Specifies if the system prompts you to enter a password when
resuming operation from a Save to File state.

Power Management Setup Power Management Setup

The Power Management Setup menu lets you balance high performance and energy conser-
vation using parameters including the following.
T
Power Management Under AC — Specifies whether to enable power manage-
ment features when AC power is in use. When AC power is connected to your
NEC Versa system, power management is usually disabled. If you enable this pa-
rameter, the system automatically activates the power management profile you set
even when AC power is used.
T
Power Savings Level — Lets you choose one of four levels of power manage-
ment.
High Perform provides the greatest system performance with only minimal
power conservation.
Longest Life provides the maximum amount of power savings.
Off disables power management and all device timeouts.
NOTE
Some operating systems such as Windows
for Workgroups and Windows 95 have their own
power management software that overrides
CMOS settings. In this case, be sure to set your
desired power management settings accordingly.
Setup and Operation 2-31