Removing The Keyboard; Locating The Speaker Cap Screws; Keyboard - NEC VERSA 6200MX Service Manual

10 Field Service Guidelines

Removing the Keyboard

1. Make sure the system is powered off and that no peripheral devices are attached.
2. Locate and remove
NEC Versa 6200MX
for reassembly.
1. Turn the NEC
2. Locate the two speaker
tem, and remove it.
the two Phillips-head screws on the bottom of the
that secure the speaker caps.
Figure 4-7 Locating the Speaker Cap Screws
Versa 6200MX over
caps, slide each
Figure 4-8 Removing the Speaker Caps
Put the screws in a safe place
and open the LCD panel.
one toward the outside edge of the sys-