Install DIMMs as follows:
1.
Remove the keyboard as described in the preceding section.
Locate the lock notches and alignment key on the DIMM.
2.
Locate the DIMM expansion port.
3.
Hold the DIMM at a 45 degree angle and align the DIMM contacts with
4.
the socket in the system. Push the connector into the socket.
Press down on the edge of the DIMM opposite the contacts until the lock
5.
tabs on the sides snap into place, securing the module.
Figure 4-11 DIMM Features
Figure 4-12 Installing the DIMM
Field Service Guidelines 13