Replacing The Right Side Cover - NEC POWERMATE VT 300 Manual

Replacing the Right Side Cover

Replace the right side cover as follows.
1. Position the right side cover over the chassis, about a
half-inch from the front panel.
Replacing the right side cover
A – Right Side Cover
B – Flange
C – Rail
2. Align the tabs on the inside of the top of the cover with
the tab slots on the left side of the chassis.
3. Fit the flange on the bottom of the cover over the rail
along the bottom edge of the chassis.
D – Tabs
E –Tab Slots
Installing Options 4-11