Cd-Rom Drive Problems - NEC POWERMATE VT 300 Manual

If this does not help, turn off the system, wait five or more
seconds, and turn on the system.

CD-ROM Drive Problems

Check the following problems to see the possible cause and
solution. The following is applicable to the CD-ROM drive.
T
The system does not see the drive.
The drive designation is wrong and should be changed.
The drive designation depends upon the storage device
configuration in your system. To find out what drive
designation letter is assigned to your drive, double click
My Computer
Windows NT 4.0 desktop. The drive designation is below
the drive icon.
As an alternative, open Windows Explorer and scroll
down the list of folders until you locate the drive icon. The
drive designation is beside the icon.
T
The drive is not reading a disc.
Check that the disc is inserted in the disc tray with the
printed label side up.
Check that the disc is a data disc, not a music disc.
Try a different disc to see if the problem is limited to one
disc.
T
The disc does not eject due to a power failure or
software error.
Turn off the system and use the emergency eject feature.
Insert the end of a paper clip into the eject hole. Press
inward on the clip to open the door.
on the Windows 95 or Windows 98 or
Solving System Problems 5-7