NEC POWERMATE VT 300 Manual page 136

T
Non-System Disk error message displays when the
system is started.
You have a diskette in the diskette drive, and the diskette
drive is set before the hard drive in boot order. Remove
the diskette from drive A and restart the system.
T
Operating system not found error message displays
when the system is started.
If you left a CD in the CD-ROM drive, your system may
not be able to boot. Try removing the CD and rebooting.
Your hard drive might need more time to spin up before
the system boots. Change the "Hard Disk Pre-Delay" to a
higher setting (see BIOS Setup Advanced Menu in
Chapter 3.)
T
System does not boot and error message displayed
on screen.
Run the Setup Utility (see Chapter 3). Check that the
parameters are set correctly, particularly if you just
installed an option.
T
System emits continuous beeps.
Turn the system off, wait at least five seconds, and turn the
system on. If the beeps continue, call your NEC CSD
dealer or the NEC CSD Technical Support Center.
T
System does not maintain date, time, system
configuration information.
Change the battery (see "Battery Replacement" in this
chapter). For assistance, call your NEC CSD dealer or the
NEC CSD Technical Support Center.
Solving System Problems 5-3