Custom Rebuild And Restore - NEC POWERMATE VT 300 Manual

Custom Rebuild and Restore

Follow these steps to format your hard drive with choices on
repartitioning the drive:
1. Launch the NEC OS Restore CD and follow the prompts
to get to the Restore Mode screen (see "Launching the OS
Restore CD").
2. Click
Custom
hard drive before reinstalling the operating system. After
you click Custom
FAT table is verified.
T
If the table is functional, a Partitioning the Hard Drive
screen appears with options allowing you to retain the
present partition structure or partition the hard disk
using FAT16 or FAT32.
T
If the existing partition table is not functional, the
system performs an "Auto" restore as described in
"Auto Rebuild and Restore."
3. If you want to partition and reformat the hard drive, go to
step 6 . Otherwise, click
partition structure on the hard drive. The Format Mode
screen appears with four options: Back, Quick, Full, and
Exit.
T
Click Back
screen.
T
Click Quick
T
Click Full
T
Click
Exit
3-26 Configuring the System
to repartition and/or and reformat your
, the integrity of your system's existing
Skip to retain the present
to return to the Partition Information
to do a quick hard drive format.
to do a full hard drive format.
to terminate the restore process.