NEC POWERMATE VT 300 Manual page 133

A – Screws
8. Replace the front panel (see "Replacing the Front Panel"
earlier in this chapter).
9. Replace the right side cover (see "Replacing the Right
Side Cover" earlier in this chapter).
10. Replace the left side cover (see "Replacing the Left Side
Cover" earlier in this chapter).
11. Connect the system and peripheral power cables and
power up the system.
12. Run the Setup program to set the new configuration (see
"BIOS Setup Utility" in Chapter 3).
4-52 Installing Options
Inserting a device
B – Device