Removing The Right Side Cover - NEC POWERMATE VT 300 Manual

Removing the Right Side Cover

Before installing (or removing) 5 1/4-inch devices in your
system, you must remove the right side cover from the
system unit to access the device mounting screws.
Before removing the right side cover, turn off
system power and unplug the system power
cable. Power is removed only when the power
cable is unplugged.
1. Turn off and unplug the system unit.
2. Disconnect any external options (such as a keyboard and
monitor) from the front or rear of the system unit.
Electrostatic discharge can damage computer
components. Discharge static electricity by
touching a metal object before removing the left
side cover.
3. Remove the left side cover (see "Removing the Left Side
Cover" earlier in this chapter).
!
WARNING
! CAUTION
Installing Options 4-9