Cable Connections - NEC POWERMATE VT 300 Manual

This chapter provides the information you need to set up and
use your system. This includes cable connections, system
startup procedures, system shutdown procedures, and system
care. The chapter also includes a matrix showing where to
find additional information about the computer.

Cable Connections

After unpacking the system and positioning the system unit in
your work area, connect the system components using your
Quick Setup poster and the following tips.
T
Use the icons on the rear of the system unit to identify the
keyboard, mouse, printer, USB, and monitor connectors.
T
If the system comes with a fax/modem board, connect it to
the telephone line as follows:
Unplug the telephone from the telephone jack on the
wall.
Plug the telephone cable that comes with the system
into the line jack on the rear of the system and into the
telephone jack on the wall.
Plug the cable on the telephone into the phone jack on
the rear of the system.
T
If your system comes with the network board option, see
your network administrator for guidelines on configuring
the system for network access.
2-2 Setting Up the System