NEC POWERMATE VT 300 Manual page 54

Advanced Menu - Power Management Setup
Menu Item
Power Management/APM
Video Power Down Mode
Hard Disk Power Down Mode
Standby Time Out (Minutes)
Suspend Time Out (Minutes)
Power Button Function
3-14 Configuring the System
Settings (default is bold)
Enabled, Disabled
The Enabled setting enables Power
Management and Advanced Power
Management (APM).
Disabled, Standby, Suspend
Specifies the power conserving state that the
VESA VGA video subsystem enters after a
specified period of display inactivity has
expired.
Disabled, Standby, Suspend
Specifies the power conserving state that the
hard disk drive enters after a specified period
of inactivity has expired.
Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60
Specifies the length of time of system
inactivity while in full power on state before
entering Standby state.
Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60
Specifies the length of time of system
inactivity while in Standby state before
entering Suspend power state.
Sleep/Suspend
Sleep/Suspend sets the power switch for
Suspend (Sleep) mode. With power on,
pressing the switch once places the system in
sleep mode. Pressing and holding the switch
in for 4 seconds turns power off.