Installing A Celeron Or Pentium Iii Upgrade Processor - NEC POWERMATE VT 300 Manual

8. Repeat steps 6 and 7 for the locking lever on the opposite
end of the cartridge.
9. Pull the cartridge straight up and out of the socket and
universal retention mechanism. Store the processor
cartridge in an antistatic bag.
10. Install the upgrade processor (see "Installing the Celeron
or Pentium III Upgrade Processor" in the next section).

Installing a Celeron or Pentium III Upgrade Processor

Install the Celeron or Pentium III upgrade processor cartridge
as follows.
1. Remove the processor currently in your system (see
"Removing the Celeron or Pentium III Processor" in the
previous section).
Before picking up the processor, reduce static
discharge by touching the metal chassis.
2. Align the cartridge with the top of the retention
mechanism so that the notch in the cartridge connector
aligns with the key in the Slot 1 connector.
3. Insert the cartridge into the retention mechanism and
evenly press down on the cartridge until it is fully seated
in the Slot 1 connector.
4-22 Installing Options
! CAUTION