NEC POWERMATE VT 300 Manual page 49

Menu Item
System Time
Floppy Drive A:
Floppy Drive B
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Main Menu Items
Settings (default is bold)
Set system time in this field. Press Tab or
Enter to move between hour, minute, and
second fields.
Example: 09:30:00
Disabled
360 KB 5 1/4"
1.2 MB 5 1/4"
720 KB 3 1/2"
1.44/1.25 MB 3 1/2"
2.88 MB 3 1/2"
Not Installed
Device type, Auto
Device type, Auto
Device type, Auto
Device type, Auto
Each device menu item displays the Hard
drive or CD-ROM identifier if a device is
installed.
If you install a hard drive that does not feature
auto IDE type detection or your IDE hard
drive was formatted on another system with
parameters different from those reported by
the drive, enter a parameter for each of the
fields in the device submenu.
Bring up a device submenu by pressing
Enter. The submenus include Type,
Cylinders, Heads, Sectors, LBA Mode, Block
Mode, Fast Programmed I/O Modes, and
32-Bit Transfer Mode. Each mode is briefly
described in the following.
Configuring the System 3-9