Custom Rebuild And Restore - NEC POWERMATE PROFESSIONAL 9000 User Manual

To reinstall any of the applications or device drivers that
came with the computer, follow the procedures in
"Restoring Applications" or "Installing Optional Software."
Restore the application software that did not come with
your computer using the vendor diskette(s) or CD-ROM(s)
included in its original packaging.

Custom Rebuild and Restore

To perform a custom OS Restore with choices on
repartitioning and/or reformatting the hard disk, boot the
system from the Select Install CD. When the system boots
from the CD, it automatically loads the MS-DOS-based
Operating System Restore program.
If possible, back up your data before performing an
OS restore.
Follow these steps to perform a customized restore of your
original, factory-installed operating system using OS
Restore:
1. Power on or restart the system and immediately insert
the Select Install disc into the CD-ROM reader.
NOTE
bootable diskette is included with the NEC Select
Install CD. In SCSI systems, first boot the system
from the bootable diskette. After the system boots,
proceed with the NEC Select Install procedure
described below.
4-62 Using Tools and Utilities
!
CAUTION
For systems with a SCSI hard disk, a