Table of Contents
Advertisement
If you are installing a 3 1/2-inch hard disk drive (see
"Installing the 3 1/2-Inch Drive").
Remove the system unit cover as previously described.
1.
2.
Remove the side panel by removing the two screws from
the top of the panel.
Removing the Front Panel
Remove the front panel only if you are installing a 5 1/4-
inch device. The front panel does not need to be removed if
you are installing a 3 1/2-inch hard disk drive.
Removing side panel screws
Installing Options 5-37
Advertisement
Table of Contents
Need help?
Do you have a question about the POWERMATE PRO2180 and is the answer not in the manual?