Table of Contents
Advertisement
T
ECP
Port (ECP) mode.
T
EPP
Port (EPP) mode.
Advanced Chipset Configuration
The Advanced Chipset Configuration allows parameters
that affect system performance to be changed. Place the
cursor in the Advanced Menu field and select the Advanced
Chipset Configuration by pressing
Chipset Configuration appears.
Advanced Chipset Configuration Submenu
The Advanced Chipset Configuration Submenu lets you
check or change the following chipset parameters.
T
Base Memory Size
T
ISA LFB Size
T
ISA LFB Base Address
T
Video Palette Snoop
T
Latency Timer (PCI Clocks)
T
Memory Error Detection
T
Onboard Audio
T
Banks 0 and 1 SIMM Detected
Base Memory Size
The Base Memory Size field controls the mapping of
addresses between "512 KB" and "640 KB." The two
choices are described as follows.
T
512 KB
640 KB to the ISA bus.
4-18 NEC Drivers and Utilities
sets the parallel port to the Enhanced Capabilities
sets the parallel port to the Enhanced Parallel
directs address mapping between 512 KB and
Enter
. The Advanced
Advertisement
Table of Contents
Need help?
Do you have a question about the POWERMATE PRO2180 and is the answer not in the manual?