T
Disabled
T
COM1, 3F8h, IRQ4
T
COM2, 2F8h, IRQ3
T
COM3, 3E8h, IRQ4
T
Auto (default)
Serial Port 2 IR Mode
The Serial Port 2 IR Mode field allows you to dedicate
Serial Port 2 for Infra-red applications. This field can be
either "Enabled" or "Disabled." The default is "Disabled."
Parallel Port Address
The parallel ports may be "Auto" detected or "Disabled."
The default is "Auto." When "Auto" is selected, the first
free LPT port is assigned. The parallel port address options
are as follows.
T
Disabled
T
LPT3, 3BCh, IRQ7
T
LPT1, 378h, IRQ7
T
LPT2, 278h, IRQ7
T
Auto
Parallel Port Mode
The Parallel Port Mode field options are as follows.
T
Compatible (default) sets the parallel port to the
standard AT compatibility.
T
Bi-directional
mode only.
sets the parallel port to input/output
NEC Drivers and Utilities 4-17