Expansion Boards; Locating Expansion Slots - NEC POWERMATE PRO2180 Manual

NOTE
slide all the way to the front panel, place one hand
on the front of the unit while you slide the cover
forward from the rear.
Secure the cover with the three thumb screws. (See
4.
"Removing the System Unit Cover," earlier in this
chapter.)
5. Reconnect all external peripherals.
Plug in your power cables.
6.

EXPANSION BOARDS

Your PowerMate supports ISA Plug and Play expansion
boards. With Plug and Play expansion boards, you can
install a board in an expansion slot without changing the
hardware settings. There are no system resource conflicts to
resolve. Plug and Play automatically configures the board
for the system.
Industry-standard 8- and 16-bit ISA, and 32-bit PCI
expansion boards are supported in the system unit. ISA
expansion boards can be Plug and Play or non-Plug and
Play boards.

Locating Expansion Slots

The PowerMate system has seven expansion slots as
follows.
T
three ISA slots
T
three PCI slots
T
one shared PCI/ISA slot.
5-8 Installing Options
The cover fits tightly. If the cover does not