Table of Contents
Advertisement
To reset all changes made in the current session of Setup,
press
Enter
without affecting your changes.
FLASH UTILITY
Check the NEC Bulletin Board Service (BBS) for available
updates to your system BIOS. You can obtain information
to update your system with the latest BIOS version from the
NEC Bulletin Board Service.
Update the BIOS from the BIOS flash diskette as follows.
Write down the Setup parameters currently set on the
1.
system.
Turn off the system.
2.
3.
Insert the flash diskette in drive A, and turn on the
system.
4.
When the flash upgrade menu appears, choose "Update
Flash Memory Area from a file."
5.
When the menu asks you to enter a path/filename, use
the arrow keys to select the ".bio" file, and press
The utility asks for a confirmation that you want to load
6.
the new flash into memory. Select "Continue with
Programming."
After the upgrade completes, remove the upgrade disk.
7.
Reboot the system and start the Setup program. Press
8.
<
F5
the Setup selections you made at the beginning of this
procedure to set the options.
See "NEC Bulletin Board Service" in Chapter 7, for
information about using the bulletin board (available in the
U.S. and Canada).
4-32 NEC Drivers and Utilities
. Press
Esc
to return to the Exit submenu
> to reset the BIOS defaults. Then, use the copy of
.
Enter
Advertisement
Table of Contents
