Shutting Down - NEC POWERMATE PRO2180 Manual

NOTE
pressing the space bar.
If a problem occurs, a series of beeps may sound. If this
happens repeatedly after powering on, power off the system
and turn to Chapter 8, If You Have a Problem. This chapter
provides some helpful hints on obvious system problems.
NOTE
that system settings have changed, run Setup (see
Chapter 4, NEC Drivers and Utilities).

Shutting Down

Follow these steps to shut down (power off) your computer.
Save your work. See the documentation that comes with
1.
your application.
Exit the application program. If you are in Windows,
2.
select File. Select Logoff or Shutdown. Selecting
Shutdown gives you a choice of Shutdown or
Shutdown/Restart. Select Shutdown again.
3. Make sure that the hard disk and diskette drives are not
in use. A lit hard disk lamp or diskette drive busy lamp
indicates that a drive is in use.
Turn off power to your monitor.
4.
Power off the system by pressing the system unit power
5.
button.
2-2 Using Your Computer
You can bypass the POST memory test by
If the system displays a message indicating