Using A Password - NEC POWERMATE PRO2180 Manual

NOTE
requires that a password be entered before entering
the Setup Utility.
Setup displays a dialog box with the following
prompts:
5. Type your password (passwords are not case sensitive)
and press
Enter
Use the arrow keys to select Exit.
6.
Select Exit Saving Changes. Press
7.
8. At the prompt, to confirm exiting setup, press
Your password takes affect the next time you power on
the system. You must enter a password the next time
you power on.

Using a Password

After you set your password in Setup and reboot the
system, a password prompt appears each time you power on
the system.
To use your password, type the password at the password
prompt and press
2-12 Using Your Computer
Enabling the Administrator Password feature
Enter new password: [
Confirm new password: [
. Reenter your password and press
Enter
again.
.
Enter
]
]
.
Enter
Enter .