Receiving A Call While In An Application; Using Features/Application During A Call; Unsuccessful Calls/Auto Redial - NEC 535 Manual

Receiving a Call While in an Application

If you receive a call while creating a new message, you can accept or reject the call. When you
accept the call, the message closes so you may answer the call. The text entry for the message
is saved in the Message center Drafts folder.
If you receive a call while you are in a PIM application (Personal Information Manager, for
example entering a phone contact, calendar entry, or a ToDo task), you can accept or reject the
call. When you accept the call, the application closes so that you may answer the call. If you
accept a call during text entry or editing changes, the text entry and changes are not saved.
If you receive a call while you are using the web browser, you can accept or reject the call. When
you accept and end the call, the web browser screen returns. You are still connected to the last
website accessed.

Using Features/Application During a Call

There are a number of features and tools that you may use during a call. The ones that you
cannot use during a call are listed in the following table:
Phone Settings Screen Settings
Network Settings Clock Settings
Games and Apps Camera
Voice Mail Send Email
Audio and Visual Send MMS

Unsuccessful Calls/Auto Redial

With Auto redial set On, your phone will try up to 10 times to redial a number if the first attempt is
not successful. If the call cannot be connected, a tone is heard, the display shows an
appropriate message, and the phone returns to Idle. The number is automatically called again
after a short delay. The failure to connect a call can be due to network problems or if the other
phone is busy.
*
Press Softkey 2 (Cancel) to end a redial attempt.
32
Calls Settings Reset Settings
Other Settings Total Calls
Clock Browser
Play Voice Mail Synchronization
Security Settings
Refer to Call Setting-Auto
Redial on page 57.