Setting The Date; Setting Date Format; Setting Time Format - NEC 535 Manual

Local Time
If you are not using the network time, you must input the local time:
*
Highlight the Local time field and input the local time for the time setting.
Press Right navigation key to move to the am/pm radio buttons.
Highlight and select the am or pm radio button.
Press Softkey 1 (OK) to store the time setting and return to Clock menu.
Remote Time
If the local and remote time (option 2) at the Show clock screen was selected, input a remote
time (any other time zone in the world).
*
Scroll to and highlight the Remote time field.
Input the remote time for the time setting.
Press Right navigation key to move to the am/pm radio buttons.
Highlight and select the am or pm radio button.
Press Softkey 1 (OK) to store the time setting and return to Clock menu.

Setting the Date

*
At the Clock menu, press 3 to display the Set date screen.
Highlight and select Use network date or input the date and press Softkey 1 (OK) and
return to the Clock menu.

Setting Date Format

*
Press MENU (Main), 1, 1, 5, and 4 to display the Set date format screen.
Highlight and select the desired date format.

Setting Time Format

*
Press MENU (Main), 1, 1, 5, and 5 to display the Set time format screen.
Press 1 to display time in 12 hour format, or 2 to display time in 24 hour format.
46
When you select Daylight
Savings time from the
timezone screen, ST
(Summer Time) displays
next to the am/pm radio
buttons in the time setting
screen.
The am/pm radio buttons
do not display for the
alarm clock, Scheduler, or
any other time fields if the
time format is set to 24
hours.
The remote time is not
adjusted in any way by
the network time update.
If the year is greater than
12/31/2016 or earlier than
01/01/2004, an invalid
date screen displays.