Table of Contents
Advertisement
Receiving a Voice Call
☛
Press
or SK1 (ANSWER) when you receive a
voice call.
You can also answer a call by pressing Options
and 1 (Answer call) when receiving a voice call
When Any key answer function is activated, you
can press any key to answer the call except SK2
(IGNORE),
, i-mode ( ) key, Up or Down key
(including the side key), the
Options. (See the section of
(page
50);
Any key answer: (page 50)
When Active flip function is activated, you can
answer the call only by opening your N600i. (See
the section of
Calls
for details.)
When the Calling Line Identification (CLI) function
has been activated by the caller, the registered
image is displayed. (See the section of
(M83);
Portrait Display: (page 52)
When the headset is connected, pressing the
headset switch also answers the call.
To reject the call
☛
Press
, SK2 (IGNORE) or 2 (Ignore call) in the
Options menu while receiving a call.
When you miss a call
If you miss a call, it is shown as a missed call by an icon
on the Home screen. The missed call is saved to the
Missed calls list. When you display Missed calls, the icon
disappears.
Phone (M1)
key,
and
Calls (M83)
for details.)
(M83);
Active flip: (page 50)
Calls
for details.)
During a Voice Call
Depending on the conditions, some options may
be greyed out and not be available
To Switch to a Grouptalk
(When there are six calls on-line and 7th call are
held call)
☛
Press Options and Join calls.
Press Options, Drop or Split Call. Pressing the
SK1 (SPLIT) splits the selected caller from the
Grouptalk and the SK2 (DROP) drops the selected
caller from the Grouptalk.
To end the call
☛
Press
to end the call.
Pressing Options to select 1 (End call) is available.
To put a call on hold
☛
Press SK1 (HOLD) or press Options, while talking, to
select Hold call. The call will be put on hold.
Options menu contains 2 pages. Use the Right/
Left key to go to the other page.
☛
To retrieve the call, press SK1 (RETRIEVE) or press
Options, while holding, to select Retrieve call.
To search the contact list
☛
Press SK2 (CONTACTS) to display the Contacts list.
See
Contacts (M5)
20
for details.
Advertisement
Table of Contents
