Table of Contents
Advertisement
Synchronizing
You must wait for the red diagonal bar on the Intellisync icon to disappear before you initiate
synchronization.
To access Synchronization:
*
Press MENU (Main), 8, and 0 to display the Synchronization screen.
Highlight and select the check boxes of the items preferred for the synchronization.
Highlight and select the server type radio button.
Press Softkey 1 (Sync) to begin the synchronization process. A busy screen displays
during synchronization.
When the synchronization is completed and successful, the Summary screen displays.
Press Softkey 1 (OK) to return to the Synchronization screen.
Conflicts
The Conflicts softkey indicator displays on the Summary screen only when conflicts occur during
synchronization.
*
Press Softkey 2 (Conflicts) to display the Conflicts screen with the number of conflicts that
occurred in each application.
Press Softkey 1 (OK) to exit the Conflicts screen and return to the Summary screen.
Ending Synchronization Process
To end the synchronization process before it is completed,
*
Press Softkey 2 (Cancel). A screen displays "Synchronization canceled" and the Tools
menu displays. The data processed up to the point of cancellation remains in the remote
server or local server.
If you do not wait for the
red diagonal bar to
disappear, your
computer may freeze
and a reboot may be
necessary.
When Intellisync is
installed on a computer
with a slow processing
speed, individual
synchronization
(synchronize one item at
a time) of phonebook
contacts, Scheduler, or
ToDo should be done.
Specifying more than
one (for example,
phonebook contacts
and ToDo tasks) on a
computer with a slow
processing speed may
cause an error message
to appear.
175
Advertisement
Table of Contents
