Licenses; Sim Card - NEC 535 Manual

Hide thumbs Also See for 535:
Table of Contents

Advertisement

SIM Card

Before using your wireless phone you must register with a wireless network service provider to
receive a SIM (Subscriber Identity Module). The SIM card contains a computer chip that stores
and tracks your phone number, the services included in your subscription, and your SIM
phonebook information. It is stored in a recess in the battery compartment.
The phone can not be used (except for emergency calls) until a valid SIM is inserted. It is
possible to transfer your SIM to another compatible phone and access your network services.
Inserting a SIM Card
*
Make sure that the power is Off and remove the battery.
Release the battery lock in the direction of arrow (1). Lift the battery up in the direction of
arrow (2) and remove it to reveal the SIM location.
Carefully slide the SIM card lock to the left. Place the SIM card under the right notch in the
space provided in the direction of the arrow (3).
Push the left side of the SIM card down into the space provided and carefully slide the SIM
card lock to the left, placing the lock notch over the card and, thus, holding it into place.
To replace the battery, place the bottom of the battery into position. Lower the battery until it
clicks into place.
24
If the SIM card is not
fully inserted when the
battery is replaced,
damage to the SIM card
can occur.
If the phone, or the SIM,
is lost or stolen then
you should contact your
Service Provider
immediately in order to
prevent unauthorized
use.
A message displays if any
locks have been set, the
wrong SIM has been
inserted, or the SIM has
been inserted improperly..
Please follow any
instructions given, e.g.,
'Return to Service Center'.
If the SIM is already
inserted, see Powering on
the Phone on page 29.

Advertisement

Table of Contents
loading

This manual is also suitable for:

535m

Table of Contents