Using The Light; Zoom; Shooting A Close Subject; Controlling Brightness - NEC 535 Manual

Using the Light

*
With the camera activated, press Softkey 1 (Light) to turn the light on or off.

Zoom

*
With the camera activated, press the Up (zoom in) or Down (zoom out) navigation keys.
You may set X1, X2, X3, or X4 magnification from the Zoom setting of the Camera Options
menu.
With the Zoom settings and the use of the navigation keys, you are allowed a total of 16 zoom
changes. As the magnification increases, the zoom in number decreases and the zoom out
increases. The following table identifies the number of zoom changes allowed at each
magnification setting.
Magnification Zoom In
X1 16
X2 5
X3 2
X4 0

Shooting a Close Subject

*
Set the lens selector switch of the camera to the flower icon position before taking the
picture. The lens selector switch is located on the outside of the flip cover beside the
camera lens.

Controlling Brightness

*
With the camera activated, press the Left or Right navigation keys to control the brightness
level of the picture.
You may set the brightness level from the Brightness setting of the Camera Options menu.
Zoom Out Note
0 Zoom out same number of times after zoom in
11
14
16 Zoom in same number of times after zoom out
Take care not to hold the
light too close to your
eyes or the eyes of others
when the light is on.
149