Accepting A Call; Rejecting A Call; Receiving A Call While In An Application; Using Features/Application During A Call - NEC 525 Manual

Table of Contents

Advertisement

Accepting a Call

*
Press
(Send) or Softkey 1 (Accept) to connect an incoming call.
To use ring silencer or any key to accept a call, refer to page 35. However, if you already have a call in progress, pressing the any key
function does not apply. With a call in progress, you must press
Flag.)

Rejecting a Call

*
(End/On-Off) or Softkey 2 (Reject) to reject or ignore the call. The call goes automatically to voice mail depending if
Press
voice mail is available by your service provider. (See Flag.)

Receiving a Call While in an Application

If you receive a call while creating a new message, you can accept or reject the call. When you accept the call, the message closes so
you may answer the call. The text entry for the message is saved and the message is saved in the Message center Drafts folder.
If you receive a call while you are in a PIM application (Personal Information Manager, for example entering a phone contact, calendar
entry, or a ToDo task), you can accept or reject the call. When you accept the call, the application closes so that you may answer the
call. If you accept a call during text entry or editing changes, the text entry and changes are not saved.
If you receive a call while you are using the web browser, you can accept or reject the call. When you accept and end the call, the web
browser screen returns. You are still connected to the last website accessed.

Using Features/Application During a Call

There are a number of features and tools that you may use during a call. The ones that you cannot use during a call are listed in the
following table:
Phone Settings
Network Settings
Games and Apps
Voice Mail
Audio and Visual

Unsuccessful Calls/Auto Redial

With Auto redial set On, your phone will try up to 10 times to redial a number if the first attempt is not successful. If the call cannot be
connected, a tone is heard, the display shows an appropriate message, and the phone returns to Idle. The number is automatically
called again after a short delay. The phone will try up to 10 times to redial the number. The failure to connect a call can be due to
network problems or if the other phone is busy.
*
Press Softkey 2 (Cancel) to end a redial attempt.
(Send) or Softkey 1 (Accept) to answer an incoming call. (See
Screen Settings
Calls Settings
Clock Settings
Other Settings
Camera
IR Send/Receive
Send Email
Clock
Send MMS
Play Voice Memo
O
O
Security Settings
Reset Settings
Total Calls
mMode
Synchronization
Accept
Reject
If you already have 2 calls in
progress (whether active, on hold,
or mutli-party), a third incoming call
can not be accepted because the
Softkey 1 (Accept) will not be
displayed on the incoming call
screen.
Do not press
(End/On-Off) to
reject an incoming call if you
already have 2 calls in progress.
Pressing
(End/On-Off) with 2
calls in progress does not reject an
incoming call but will disconnect a
call in progress.
23

Advertisement

Table of Contents
loading

Table of Contents